Search for: Max
Items 1 - 10 of 47
In stock
Cartridge for Iomega Ditto Max streamer drives
- Capacity: 2,5 GB uncompressed, 5 GB compressed
- new and selaed
(Illustration similar)
In stock
- new, original packaging, shrink-wrapped
- 8 inches FD1
- 10 pieces
- Single Sided
- Double Densitiy
- with WP Notch
- Color: black
New
New Old Stock
- new
- 1 x 2.8 inch Micro Diskette QD2
- double sided
- 64 kB/side
- 59 tpi
- color: black
- incl. cardboard slipcase and stick-on label
Attention: Due to the age of the floppy disks, 100 % freedom from errors cannot be guaranteed.
(Illustration similar)
In stock
- new, original packaging, shrink-wrapped
- 8 inches FD2
- 10 pieces
- Double Sided
- Double Densitiy
- with WP Notch
- Color: black
In stock
- 5 labels
- for 3 inch floppy disks
- self-adhesive
(Illustration similar)
In stock
IEEE-488 cable as used for computers and peripherals from HP, Commodore or Tektronix, among others.
- new
- GPIB (General Purpose Interface Bus, 8-bit parallel bus, max. 1 MBit/s)
- male/female combination (male + female)t, stackable
- Length: 2 meters
- solid metal connectors with knurled screws
- Cable material: copper
- Color: Grey
(Illustration similar)
Best sellers
User Port edge connector for Commodore 64 and 128
- 44 pins
- 2.54 mm pin pitch
- Insulator:Glass filled PBT 94v-0, Black
- Contacts: Brass or Phosphor Bronze
- Plating: Contact Gold plated, Dip Tin plated
- Contact resistance: 20 mO max. at DC 100 mA
- Insulation resistance: 1000 mO min. at 500V DC
- Withstanding Voltage: 1000 V AC/rms 50 Hz for 1 min
- Current rating: 2 AMP
- Operating temperature: -55 to +105 °C.
- Soldering Temperature: 260 °C, 6 s max.
In stock
1-pole button - suitable for Cartridges, EPROM cards or Casemodding, for example
- New
- Color: Red/Silver
- With thread, mounting nut and locking ring
- With soldering lugs
- Button 1-pin
- Button type: No contact
- Max. 250 V/0.5 A
- Dimensions: 27.5 x 10 x 10 mm (L/W/H)
- Installation depth: 6 mm
- Mounting hole: 6.5 to 8 mm
In stock
1-pole button - suitable for Cartridges, EPROM cards or Casemodding, for example
- New
- Color: Red/Silver
- With thread, mounting nut and locking ring
- With soldering lugs
- Button 1-pin
- Button type: No contact
- Max. 250 V/0.5 A
- Dimensions: 27.5 x 10 x 10 mm (L/W/H)
- Installation depth: 6 mm
- Mounting hole: 6.5 to 8 mm
In stock
1-pole button - suitable for Cartridges, EPROM cards or Casemodding, for example
- New
- Color: Black/Silver
- With thread, mounting nut and locking ring
- With soldering lugs
- Button 1-pin
- Button type: No contact
- Max. 250 V/0.5 A
- Dimensions: 27.5 x 10 x 10 mm (L/W/H)
- Installation depth: 6 mm
- Mounting hole: 6.5 to 8 mm
Items 1 - 10 of 47